S.T.L. High Clearance LIFT KIT | 2011-2018 GM 2500HD | 3-6" STAGE 6

STAGE 6 ADJUSTABLE 3-6” CST S.T.L. (;STOCK TORSION LOCATION) HIGH CLEARANCE LIFT KIT WITH 2.5 PRO-SERIES CST SHOCKS.

 

THIS CST KIT WILL LIFT THE 2011-2018 2500HD 2WD & 4WD A TRUE 4 INCHES WITHOUT DROPPING THE TORSION CROSS MEMBER DOWN OR COMPROMISING THE RIDE!

More details


$5,154.85 tax excl.

CSK-C3-18-8

 

This STAGE 6 adjustable 3 to 6 inch S.T.L. (Stock Torsion Location) High Clearance design for the 2011, 2012, 2013, 2014, 2015, 2016, 2017 & 2018 Chevy / GMC 2500HD trucks provides the “leveled look” without sacrificing the ride quality or function.

 

We've combined our experience in off road racing with trophy truck quality engineering to ensure that your suspension will have increased strength, performance, overall build integrity and perform better than stock. Throughout the initial design and R&D process we made sure to retain the factory O.E. suspension geometry and design attributes!  

 
Kit includes gusseted high clearance cross-members with a full size differential skid plate, cast-iron / CNC machined front steering knuckles, differential drop brackets, heavy duty bump stop brackets, extended sway bar end links, brake line drop brackets & all necessary install hardware.

 

This stage 6 kit also includes four 2.5 Pro-Series CST shocks & front shock mounts engineered specifically for the 2.5 CST reservoir shocks. The CST Pro-Series shocks offer adjustable ride-control, allowing the driver to self-tune the shocks & ride to their own preference.

 

Steering stabilizer brackets are built into the kit and our stabilizer shock kit can be purchased as an optional upgrade. For the rear this 3-6" kit includes BILLET 1" lift blocks and heavy duty, zinc-plated u-bolts.

 

No cutting of the front differential required.

 

Retaining the factory front wheel track width allows this kit to work perfectly with all of the trucks stability assist features including the GM StabiliTrak system.

 

CSK-C3-18-8 / STAGE 6 / KIT BREAKDOWN

  • CSS-C3-18-B1 / QTY 1
  • CSS-C3-18-B2 / QTY 1
  • CSS-C3-18-B3 / QTY 1
  • CSS-C33-5 / QTY 1
  • CSR-7507 / QTY 1
  • CSR-7502 / QTY 1

 

STAGE 7 3-6” Kit Features

  • 3-6" ADJUSTABLE LIFT HEIGHT. (LEVEL STANCE AT 4 INCHES OF LIFT WITH 1" REAR BLOCKS INSTALLED)
  • STOCK RIDE AND HANDLING!
  • SUPERIOR CV & TIE-ROD ANGLES!
  • HIGH CLEARANCE, FULLY BOXED X-MEMBERS!
  • KIT INCLUDES STEEL LOWER SKID-PLATE TO PROTECT THE FRONT DIFF.
  • STOCK TORSION LOCATION (S.T.L.) FOR MAXIMUM GROUND CLEARANCE!
  • INCREASED TIRE CLEARANCE.
  • OVERALL TRACK WIDTH REMAINS NEAR FACTORY.
  • ABILITY TO RE-USE O.E. SHOCKS. (KIT INCLUDES FRONT SHOCK ADAPTERS)
  • GM STABILITRAK APPROVED!
  • PARTS COVERED IN A HIGH QUALITY GLOSS BLACK POWDER COAT FINISH.
  • NO WELDING REQUIRED.
  • KIT INCLUDES FOUR CST PRO-SERIES 2.5 STEEL-BODY REBUILADABLE SHOCKS. (2 RESERVOIR FRONTS / 2 PIGGY-BACK REARS)
  • 14 WAY ADJUSTABLE SHOCKS.
  • CAST-IRON SPINDLES MADE AND MACHINED IN THE U.S.A.
  • CST SUPERIOR QUALITY FIT, FUNCTION, AND APPEARANCE!
  • IMPROVED HANDLING.
  • ABILITY TO BE PUT BACK TO STOCK.
  • ABILITY TO RUN O.E. 20” WHEELS!
  • MADE IN THE U.S.A.

 

Notes

  • TORSION KEYS REQUIRED FOR 5-6 INCHES OF LIFT!
  • ADDITIONAL REAR LIFT REQUIRED FOR LEVEL STANCE WHEN KEYS ARE ADDED!
  • SOME MODELS MAY NEED ADDITIONAL REAR LIFT COMPONENTS FOR TRUCK TO BE COMPLETELY LEVEL AT 4"
  • KIT WILL FIT ON 35OO MODELS BUT MAY REQUIRE ADDITIONAL PARTS, U-BOLTS WILL NEED TO BE LONGER ON VEHICLES WITH OVER-LOAD SPRINGS.
  • SHOCK PKG. DESIGNED FOR 4-5 INCHES OF LIFT.
  • MUST RUN O.E. UCA AT 3" LIFT*

 

Optional / UPGRADE Parts

  • CSS-C24-16 | EXTREME DUTY TIE-ROD KIT
  • CSS-C29-16 | D.E.F. TANK SKID-PLATE (2011-16 DURAMAX ONLY!)
  • CSR-2944 | CST STEERING STABALIZER
  • CSS-C20-2 | 2" REAR KIT



 

SUGGESTED WHEEL SIZES

(Most factory / O.E. 20” wheels and tires will work with this lift kit installed)

Wheels for use with oversized tires -
17 x 8" or 9" w/ 5" BS
18 x 9" w/ 5" BS
20 x 9" or 10" w/ 5.5" BS
(some higher offset wheels may work....test fitment required)

Tire sizes for use on factory, O.E. 20" wheels!
33-34" x 11.5"

275/65/20 mounted on 9" wide wheels with no trimming (red Chevy pictured above)

 

SUGGESTED TIRE SIZES

Suspension set at 4” of lift / torsions at stock adjustment.

  • 33” x12.5” OR SIMILAR ON 8-9” WIDE WHEELS
  • 315 / 70 / 17 ON 8 OR 9” WIDE WHEELS (AT 5")
  • 34” X12.5” ON 9” WIDE WHEELS (MINOR TRIMMING REQUIRED)
  • ANYTHING LARGER, TALLER OR WIDER IS BEYOND CST RECOMMENDATIONS AND UP TO THE INSTALLER.
  • MAXIMUM BACKSPACING VARIES BY RIM SIZE (see above)

 

ADDITIONAL KIT NUMBERS AVAILABLE THRU DISTRIBUTORS

 

Stage One 3-6” | CSK-C3-18-1 | NO SHOCKS, INCLUDES BRACKETS TO RE-USE O.E. FRONT SHOCKS. O.E. REAR SHOCKS CAN BE RE-USED WITH THE 1” LIFT BLOCKS INCLUDED IN THIS KIT.

 

Stage Two 3-6” | CSK-C3-18-2 | INCLUDES BRACKETS TO RE-USE O.E. FRONT SHOCKS, ALSO INCLUDES CST MONO-TUBE STREET-SERIES REAR SHOCKS TO BE USED WITH THE 1” LIFT BLOCKS INCLUDED IN THIS KIT.

 

Stage Three 3-6” | CSK-C3-18-3 | KIT INCLUDES 4 CST DIRT-SERIES 2.0 EMULSION SHOCKS (NON RESERVOIR) AND FRONT SINGLE 2.0 SHOCK MOUNTS.

 

Stage Four 3-6” | CSK-C3-18-4 | KIT INCLUDES 4 CST DIRT-SERIES 2.0 RESERVOIR SHOCKS AND FRONT 2.0 SINGLE SHOCK MOUNTS.

 

Stage Five 3-6” | CSK-C3-18-6 | KIT INCLUDES 6 CST DIRT-SERIES 2.0 RESERVOIR SHOCKS AND FRONT 2.0 DUAL SHOCK MOUNTS.

 

Stage Six 3-6” | CSK-C3-18-8 | KIT INCLUDES 4 CST PRO-SERIES 2.5 SHOCKS AND FRONT 2.5 SHOCK MOUNTS.

 

Stage Seven 3-6” | CSK-C3-18-9 | KIT INCLUDES 6 CST PRO-SERIES 2.5 SHOCKS AND FRONT 2.5 DUAL SHOCK MOUNTS.



 

 

 

 

 



 

 

 

 



 



 



 

LEVELING KITS
2WD LIFT SPINDLES
2WD & 4WD LIFT KITS
SHOCKS & COIL-OVERS
ARMS & ACCESSORIES

Cart

product (empty)

PayPal