LIFT KIT | 2004-2012 COLORADO/CANYON 4WD (W/TORSIONS*) | 5"

CSK-C23-304

COLORADO / CANYON 4WD 5" LIFT KIT INCLUDES FABRICATED STEERING KNUCKLES, X-MEMBERS, DIFF DROP & SKID PLATE, STEEL BRAIDED BRAKE LINES, REAR CARRIER SHIM, REAR ADD A LEAFS & ALL INSTALL HARWARE.

 

*NOTE / ADDITIONAL PARTS REQUIRED FOR LEVEL STANCE ON SOME TRUCKS / THIS KIT IS FOR 4WD TORSION TRUCKS ONLY!

 

CALL FOR PRICING!

More details

CSK-C23-304

INSTALL THIS 5" LIFT KIT ON YOUR COLORADO OR CANYON 4WD (TORSION BAR FRONT END ONLY*) AND YOU WILL NOT BE DISSAPOINTED! THE CST KIT WILL GIVE YOU A FULL 5" LIFT WITH MINIMAL CV ANGLE CHANGE, STOCK RIDE & HANDLING + CLEARANCE FOR A SET OF 285/75/16 TIRES WITH 16 X 8 INCH WHEELS. (or a wheel & tire package of comparable overall height) 

 

ORDER PART NUMBER CSS-C3-11-B1 & CSS-C3-11-B2 AND YOU GET FRONT 5" FABRICATED CROSS MEMBERS W/ INTEGRATED DIFFERENTIAL SKID PLATE, FABRICATED KNUCKLES, BUMP STOP MOUNTS, AND HEIM JOINTED SWAY BAR LINKS. ALSO PROVIDED IN THE KIT ARE NEW BRACKETS FOR THE TORSION BARS SO THEY DO NOT HAVE TO BE DROPPED DOWN AND AN ADD A LEAF TO LIFT THE REAR OF THE TRUCK. FOR THOSE OF YOU THAT WOULD PREFER TO LIFT THE BACK JUST A LITTLE HIGHER THAN THE STANDARD ADD LEAF WE OFFER A 1" REAR LIFT SHACKLE. (CHECK DRIVELINE CLEARANCE AND SHOCK LENGTH IF YOU RUN BOTH!) SOME OF THESE TRUCKS REQUIRE MORE CLEARANCE, WE NOW ALSO OFFER AN ADDITIONAL X-MEMBER SUPPORT FOR THE REAR OF THE 4WD COLORADO WITH A 1 PC STEEL DRIVE SHAFT. WITH THIS IN PLACE YOU CAN USE A LONGER SHOCK IN THE REAR.

 

*NEW EXTENDED LENGTH FRONT AND REAR SHOCKS ARE REQUIRED FOR USE OF THIS LIFT KIT & AVAILABLE IN THE CST PERFORMANCE SHOCK LINE.

 

WE RECOMMEND USING A 285/70/17 OR 33/12.50/17 TIRE WITH AN 8" WHEEL WITH UP TO 4.5" BACKSPACE.



 

NOTES

  • UPGRADED SHOCKS AVAILABLE & REQUIRED
  • WHEELS MUST NOT HAVE MORE THAN 4.5" BACKSPACE
  • TRUCK MAY SIT HIGH IN THE FRONT
  • SOME TRUCKS MAY REQUIRE SHACKLE & ADD A LEAF FOR LEVEL STANCE
  • STOCK LENGTH (O.E.) SHOCKS WILL NOT WORK
  • DO NOT USE ON TRUCKS WITH COILS IN THE FRONT
  • THIS IS A 5" LIFT, IT WILL NOT CLEAR 33'S ON WIDE WHEELS OR 35'S, IF YOU MAX OUT YOUR TORSIONS THE CST SHOCK WILL BE TOO SHORT!

KIT FEATURES

  • FACTORY LIKE RIDE
  • STAINLESS STEEL BRAIDED FRONT BRAKE LINES
  • HIGH CLEARANCE X-MEMBER
  • DIFFERENTIAL SKID PLATE
  • CONSTRUCTED OF 3/16 AND 1/4" STEEL, AND DOM TUBING
  • PARTS COVERED IN A HIGH QUALITY GLOSS BLACK POWDER COAT FINISH



ADDITIONAL PARTS

CSS-C9-2 | 1" REAR SHACKLE LIFT

CSR-1100 | CST PERFORMANCE SHOCKS (FRONT)

CSR-2455 | CST PERFORMANCE SHOCK (REAR W/ ADD A LEAF)

CSS-C22-11 | REAR CROSS MEMBER SUPPORT

CSR-2300 | CST PERFORMANCE SHOCK (REAR W/X-MEMBER ADDED)