06-08 Dodge Ram 1500 2wd 7″ Stage 1 Suspension System

Description

CSK-D2-2 | 06-2008 RAM 1500 2WD | 7″ LIFT KIT

 

KIT INCLUDES AMERICAN MADE DUCTILE CAST-IRON LIFT SPINDLES, FRONT SPACERS, FABRICATED 3″ LIFT BLOCKS, U-BOLTS & FRONT BRAKE LINES FOR THE 06-2008 DODGE / RAM 1500 2WD. PROVIDING A LEVEL STANCE AND INCREASED TIRE & GROUND CLEARANCE WHILE MAINTAINING THE VEHICLES STOCK RIDE.  MEASURE YOUR VEHICLES STARTING HEIGHT, SOME TRUCKS MAY REQUIRE LARGER REAR BLOCKS FOR A LEVEL STANCE. LONGER SHOCKS ARE REQUIRED.

 

 

• DESIGNED TO FIT 35″ TIRES W/ 8 OR 9″ WIDE WHEELS.
• O.E. QUALITY DUCTILE CAST-IRON SPINDLES ARE ENGINEERED & MANUFACTURED IN THE U.S. FROM START TO FINISH, INCLUDING MACHINING.
• MINIMAL TRACK-WIDTH CHANGES & MAXIMUM GROUND CLEARANCE!
• HIGHER LEVEL OF QC THAN IMPORTED CHINESE PARTS.
• SPINDLE QUALITY ALLOWS FOR FACTORY ALIGNMENT SPECS.
• U-BOLTS ARE ZINC PLATED TO PREVENT RUST.
• D.O.T. APPROVED FRONT BRAKE-LINES.
• FABRICATED PARTS ARE COVERED IN A HIGH QUALITY TWO STAGE GLOSS BLACK POWDER-COAT.
• COMPLETE KIT MADE IN THE U.S.

 

Notes

• 17″ WHEELS CAN NOT HAVE MORE THAN A 4.75″ BACKSPACING.
• LONGER SHOCKS REQUIRED!
• 02-08 MODELS MUST RUN THE STOCK COILS WITH THE SPACERS IN THIS KIT!
• LONGER FRONT SHOCKS REQUIRED. STEM TO BARPIN MOUNTING, 15.5 EXTENDED & 10.3 INCHES COMPRESSED.

 

INDIVIDUAL KIT PART NUMBERS

• CSS-D1-5 | CAST-IRON LIFT SPINDLES
• CSE-C16-4 | FRONT LIFT SPACERS (02-2008*)
• CSS-D11-1 | BRAKE LINES
• CSB-C14-3 | 3″ LIFT BLOCKS
• CSU-D15-11R | U-BOLT KIT W/ NUTS & WASHERS

 

SUGGESTED WHEEL & TIRE SIZES

02-2008 RAM 1500

• 33” x12.5” OR SIMILAR ON 9-10” WIDE WHEELS
• 315 / 70 / 17 ON 8-10” WIDE WHEELS
• 35” X12.5” ON 8-9” WIDE WHEELS (MINOR TRIMMING REQUIRED)
• ANYTHING LARGER, TALLER OR WIDER IS BEYOND CST RECOMMENDATIONS AND UP TO THE INSTALLER.

• MAXIMUM BACKSPACING IS 4.75”