20-24 HD 2500 / 3500 8″ Stage 4 Suspension System
$9,399.60
CSK-G24-19 8″ Stage 4 Suspension Includes the following parts:
CSS-C3-24-B1 1-PIECE SUB FRAME
CSS-C3-24-B2 SPINDLES
CSS-C3-24-B3 1-PIECE DIFF DROP/X-Member, SWAY BAR EXTENSIONS, HARDWARE
CSU-C15-11HD REAR U-BOLT KIT
CSL-C19-5 SOFT RIDE REAR LEAF SPRINGS
CSA-7525 2.5″ PRO SERIES REMOTE RES FRONT SHOCKS w/ CDA
CSA-7515 2.5″ PRO SERIES PIGGYBACK REAR SHOCKS w/CDA
CSS-C33-9 FRONT SHOCK AND RESERVOIR MOUNTING KIT
Description
The CST 8″ Performance Suspension System for the 2020-2024 Chevy & GMC HD Trucks. This kit will provide superior performance on or off road. 1-Piece Sub frame is designed to give you the most ground clearance while protecting vital front suspension components. The front spindles are welded and fabricated from laser cut and precision materials. All of CST products are precision fabricated in house to provide superior strength and durability. CST Performance Suspension products are designed and manufactured in the USA!
KIT FEATURES
- MINIMAL TRACK-WIDTH CHANGES
- NO NEED TO CUT/MODIFY THE FACTORY TORSION X-MEMBER
- SUPERIOR CONTROL ARM, CV & TIE ROD ANGLES
- HIGH CLEARANCE, FULLY REINFORCED ONE-PIECE SUB-FRAME
- FULLY BOXED X-MEMBER TO DROP THE DIFFERENTIAL
- CST CENTER-LINK w/ HEIM SUPPORTS INCLUDED FOR ADDITIONAL STEERING SUPPORT & STRENGTH
- HAND FABRICATED KNUCKLES
- KIT INCLUDES STEEL LOWER SKID PLATE TO PROTECT FRONT DIFF
- INCREASED SUSPENSION TRAVEL, TIRE & GROUND CLEARANCE
- GM STAILITRAK APPROVED
- PARTS COVERED IN A HIGH-QUALITY GLOSS BLACK POWDER COAT FINISH
- NO WELDING REQUIRED
- REDUCED INSTALL TIME WHEN COMPARED TO OTHER MANUFACTURERS KITS
- CST SUPERIOR QUALITY FIT, FUNCTION AND FINISH
- KIT INCLUDES SOFT-RIDE REAR LEAF SPRINGS
- ABILITY TO PUT BACK TO STOCK
- NO NEED FOR CV SPACERS
- LEVEL STANCE WITHOUT SACRIFICING RIDE QUALITY
- CLEARS UP TO 40″ TIRES
- MADE IN THE U.S.A.
- SHOCKS ARE DESIGNED & BUILT IN HOUSE BY CST FOR BEST OVER-ALL RIDE
- CST PRO-SERIES SHOCKS PROVIDE AN UNSURPASSED, IMPROVED RIDE ON THE HIGHWAY
- ON THE FLY COMPRESSION ADJUSTABLE 2.5 SHOCKS
- HAND-FABRICATED FRONT SHOCK MOUNTING KIT & RESERVOIR MOUNTS w/ BILLET CLAMPS
OPTIONAL ITEMS:
CSS-C2-20 BOXED UPPER CONTROL ARMS WITH O.E. STYLE BUSHINGS AND HIGH ANGLE BALL JOINTS
CSS-C24-19 HEAVY DUTY TIE ROD ENDS
CSS-C29-26 ALUMINUM SKID PLATE
CSP-C28-8 FRONT DRIVESHAFT
WHEEL AND TIRE FITMENT:
5″ MAX BACK SPACING
WHITE TRUCK SHOWN WITH 38-13.5 24×12 W/ 4.75BS
GRAY TRUCK SHOWN WITH 40-15.5 20×9 W/ 5″ BS
BOTH REQUIRED MINOR TRIMMING
NOTES
CSL-C19-5 CST SOFT RIDE REAR LEAF SPRINGS ARE NOT DESIGNED FOR TOWING. AIR BAGS RECOMMENDED
CSP-C28-8 NEEDED FOR 4WD TO WORK
Additional information
Weight | 400 lbs |
---|---|
Make | |
Model | |
Vehicle Year | |
2WD or 4WD |
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
You may also like…
-
11-24 HD 2500 / 3500 Extreme-Duty Tie Rods (for 8-10″ Lifts)
$319.95 -
Sale!
20-24 HD 2500 / 3500 Boxed Upper Control Arms
$799.95Original price was: $799.95.$689.95Current price is: $689.95. -
20-24 HD 2500 / 3500 Front Aluminum Skid Plate (for 8-10″ CST Lifts)
$299.95 -
20-24 HD 2500 / 3500 4wd Diesel | 10″ Stage 3 Suspension System
$11,679.35