07-21 Tundra 7″ High-Clearance Suspension System / Stage 1

$2,619.85

STAGE 1 SUSPENSION SYSTEM BREAK DOWN

  • CSS-T3-3-B1 | QTY 1
  • CSS-T3-3-B2 | QTY 1
  • CSS-T3-3-B3 | QTY 1

Available on backorder

Description

CSK-T10-1 | 2007-2021 TUNDRA 2WD/4WD | 7” HIGH CLEARANCE LIFT KIT

AT THE BASE OF THIS SUSPENSION SYSTEM, WE USE 1/4″ OR BETTER STEEL FOR OUR FABRICATED KNUCKLES, A TRIED AND TESTED PART OF ALMOST ALL IFS 4WD CST LIFT KITS. NEXT, WE INCORPORATE A PAIR OF FABRICATED & GUSSETED, HIGH CLEARANCE CROSS-MEMBERS THAT FOLLOW FLUSH INTO THE FACTORY X-MEMBER LINES FOR A CLEAN FIT AND THE ULTIMATE IN GROUND CLEARANCE. LEAVING NOTHING TO CHANCE WE INTEGRATE A FORWARD SKID ON THE FRONT CROSS-MEMBER TO PROTECT THE FACTORY 4WD ACTUATOR SOLENOID & INCLUDE A SECOND SKID-PLATE THAT CONNECTS THE FRONT AND REAR CROSS-MEMBERS TO COMPLETELY PROTECT THE FRONT (IF APPLICABLE) DIFFERENTIAL. NEXT, WE USE A TRUE DIFFERENTIAL DROP, PROVIDING EXCELLENT CV ANGLES, NEW SWAY BAR LINKS, BUMP STOP MOUNTS AND FRONT UPPER COIL-OVER EXTENSIONS TO RETAIN THE FACTORY RIDE & HANDLING. 

REAR OFF-SET LIFT BLOCKS, U-BOLTS, CARRIER BEARING SPACER & RELATED HARDWARE COMPLETE THE KIT FOR A LEVEL STANCE.  

KIT FEATURES

  • SPINDLES ARE CONSTRUCTED OF PRECISION LASER CUT ¼” OR BETTER STEEL, CNC MACHINED BALL JOINT TAPERS, AND COMPLETELY MIG WELDED.
  • HEAVY DUTY, LASER CUT HIGH-CLEARANCE CST X-MEMBERS.
  • 1/4″ SKID PLATE.
  • HEAVY DUTY OUTER-TIE-RODS.
  • HEIM-JOINTED SWAY BAR END-LINKS.
  • CST SUPERIOR QUALITY, FIT, FINISH AND FUNCTION!
  • IMPROVED GROUND AND TIRE CLEARANCE!
  • MINIMAL TRACK WIDTH CHANGES.
  • O.E. RIDE & HANDLING.
  • NO CUTTING OF THE FRONT DIFFERENTIAL!
  • MADE IN THE U.S.A.

NOTES

  • 20″ OR LARGER WHEELS REQUIRED!
  • NO MORE THAN 5″ OF BACK SPACING.
  • 37″ TIRES W/TRIMMING ON AN 8 OR 9″ WIDE WHEELS AND/BMC
  • LONGER REAR SHOCKS REQUIRED.

SUGGESTED TIRE SIZES

  • 35” x12.5” OR SIMILAR ON 9” WIDE WHEELS
  • 34” x12.5” OR SIMILAR ON 10” WIDE WHEELS (TRIMMING REQUIRED)
  • 35″ x12.5″ ON 8-9″ WIDE WHEELS
  • 35″ x12.5″ ON 10″ WIDE WHEELS (TRIMMING REQUIRED)
  • 37″ x12.5″ ON 8-9″ WIDE WHEELS (w/ BMC)
  • ANYTHING LARGER, TALLER OR WIDER IS BEYOND CST RECOMMENDATIONS AND UP TO THE INSTALLER.
  • MAXIMUM BACKSPACING IS 5” / 20” OR LARGER WHEELS

Additional information

Weight 150 lbs
Make

Model

Vehicle Year

, , , , , , , , , , , , , ,

2WD or 4WD

,

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

You may also like…

preloader